N21 - The New "Vintage"
N21 Vintage Durango Flat Black - 199.95
N21 Vintage Metal White - $199.96
Some colors and styles may have limited quantities available.
Old is New again with the Nolan N-21, a minimalist product inspired by the timeless "vintage" look. It continues the legacy of its predecessor, the N20, and is ideal for both cruise and cafe racers.
Different classic and retro looks are available, depending on the model, due to a variety of color combinations for the inner padding, shell edge, face shield edge, VPS edge, as well as the graphics and the shell itself. The Nolan Microlock® retention system, a helmet lock ring, and front air vents complete the N21.
• Two (2) shell sizes accommodate sizes S through XL. Shell is Lexan Polycarbonate.
• Scratch resistant treatment on both side of VPS (Vision Protection Shield) plus UV400
• Nolan Microlock® retention system.
• Fully adjustable Chin Strap is integrated into inner padding for smooth fit.
• Helmet Lock Ring.
• Frontal Air Intakes on selected models.
• Removable, washable, antibacterial inner padding with attatched neck roll for noise reduction.
• Approximately 950 grams
• DOT approved (in Europe ECE-2205 approved)
LIMITED WARRANTY CERTIFICATE VALID FOR 5 (FIVE) YEARS FROM THE DATE OF PURCHASE OR 7 (SEVEN) YEARS FROM THE DATE OF MANUFACTURE Thank you for choosing a Nolan® helmet. BUT ALWAYS REMEMBER THAT THE UTMOST CARE AND CAUTION ARE YOUR BEST POSSIBLE PROTECTION WHENEVER YOU RIDE A MOTORCYCLE! PLEASE READ CAREFULLY ALL THE CLAUSES AND CONDITIONS OF THIS LIMITED WARRANTY CERTIFICATE. By this LIMITED WARRANTY CERTIFICATE, Nolan® and X-Lite® guarantee to the original purchaser of the helmet that the product is free from all material and manufacturing defects at the time of purchase. COVER PROVIDED BY THE WARRANTY This limited warranty certificate offers these warranty periods: a) for defects which might arise on painting or coating of the outer shell, 2 (two) years from the date of purchase or 4 (four) years from the date of manufacture (printed on the label sewn inside the helmet), whichever comes first; b) for all other defects not included in item a), 5 (five) years from the date of purchase or 7 (seven) years from the date of manufacture (printed on the label sewn inside the helmet), whichever comes first. Nolan® shall proceed, through their distribution networks and after verifying the defect, to repair or replace the defective product. Nolan® shall supply all the materials and provide all the labor reasonably necessary to remedy the reported defect, except for cases in which the damage is attributable to one of the reasons listed in the paragraph below, entitled "Exclusions and Limitations of Cover". EXCLUSIONS AND LIMITATIONS OF COVER This warranty covers only material and manufacturing defects. Nolan® cannot be held liable for damages to the product which are either wholly or partially attributable to any other cause, including, but not limited to: a) damage caused by improper use, lack of due care, normal wear and tear of internal and external components; b) scratches, abrasions, detaching of paint or other damage caused to the external painted parts of the helmet by accidental impacts; c) scratches, abrasions, deterioration or other damage caused to the helmet visor by accidental impacts or by incorrect cleaning procedure of the visor; d) damage caused by the application of stickers and/or adhesives; e) any damage caused by an accident; f) any modification or change made to the helmet by the user or by third parties; g) damages caused by any type of painting/lacquering applied un the external shell by the user or third party; h) color changes or damage caused by exposure to harmful chemical products; i) color variations or damages caused by exposure to sunlight and/or heat sources; j) change in the fluorescent colors used in the graphics on some models as a consequence of prolonged and direct exposure to sunlight; k) use of incompatible accessories not sold by Nolan®. Defects covered by this warranty likewise do not include all the specific and subjective situations which may arise during dynamic use of the helmet, such as problems of comfort due to improper sizing, or wind noise while riding. Nolan® cannot in any case be held liable for accidental or consequential damage (including, with no limitation whatsoever, injuries to a person or persons) resulting from the failure to comply with the obligations stipulated in this warranty regarding Nolan® products. Some states do not allow the exclusion or limitation of implied warranties, incidental or consequential damages, so the above limitations and exclusions may not apply to you. This warranty gives you specific legal rights, and you may also have other rights which vary from state to state. VALIDITY OF THIS LIMITED WARRANTY This warranty is valid only if all the sections of the attached REGISTRATION FORM are completed in full and the registration is returned to the address indicated on the card within 10 (ten) days from the date of the purchase: 1) number of the homologation label (printed on the label sewn inside the helmet or on the chinstrap) and designation of the model; 2) name of the authorized dealer; 3) date of purchase of the helmet; 4) name address and telephone number of the purchaser. PROCEDURE TO BE FOLLOWED TO MAKE POSSIBLE CLAIMS To proceed with any claim covered by this warranty, the purchaser must notify directly Nolan’s agent in the USA of the alleged defect encountered by him. In agreement with Nolan’s agent, the purchaser may have to return the helmet to which the complaints refer, at the purchasers expense, along with the sales receipt or other proof of purchase (and date of purchase) and a copy of the warranty registration form. BEFORE REFERRING THE MATTER TO THE AGENT, WE ADVISE YOU TO READ CAREFULLY THE USERS MANUAL ATTACHED TO THE HELMET WHICH MUST BE FOLLOWED SCRUPULOUSLY FOR YOUR OWN PROTECTION AND THAT OF THIRD PARTIES. 5 (FIVE) YEARS AFTER THE DATE OF PURCHASE OR 7 (SEVEN) YEARS AFTER THE DATE OF MANUFACTURE(PRINTED ON THE LABEL SEWN INSIDE THE HELMET) THIS LIMITED WARRANTY SHALL LAPSE ENTIRELY. AFTER THAT PERIOD, WE STRONGLY ADVISE YOU TO REPLACE YOUR HELMET FOR YOUR OWN SAFETY. CERTAIN ENVIRONMENTAL FACTORS, IMPROPER USE OF THE PRODUCT, ACCIDENTAL IMPACTS, NORMAL EXTERNAL AND INTERNAL WEAR AND TEAR, INVOLVEMENT IN ACCIDENTS, HOWEVER MINOR, ETC., MAY HAVE SERIOUSLY INFLUENCED THE MECHANICAL OR PHYSICAL CHARACTERISTICS OF THE PRODUCT, THEREBY IMPAIRING ITS PROPERTIES. This warranty is valid in the entire territory of the United States and Canada and is the only express warranty given by Nolan® in relation to the sale of their own helmets. Any service provided under the warranty does not have the effect of extending the warranty period itself. If the helmet or any of its components are replaced, a new warranty period does not begin to run on the product or on individual components supplied by way of replacement; the date of purchase or the date of manufacture of the original helmet remains the deciding factor.